0zł

Dviračio remonto stovas Cyclus Tools BikeLift S1 for 1 workplace without clamps (290401)

Prekės kodas: STND53
Prekės prieinamumas
bus rodomas pasirinkus dydį
Klausti apie prekę
close
Užklausa dėl prekės
 
Aprašymas - Dviračio remonto stovas Cyclus Tools BikeLift S1 for 1 workplace without clamps (290401)
Cyclus Tools develops and produces top quality tools for professional bicycle repair shops, but of course it’s also appropriated for hobby technicians. Produced in Europe, these durable tools are permanently proofed by our quality checks. With furnitures for your workshop or cosmetic care products the portfolio is rounded off very well. For every problem Cyclus Tools offers solutions. Cyclus Tools counts among the leading manufacturers of tools for bicycles. To stay at the top we continuously enhance our products for today’s fast changing conditions. Standard freestanding model with: 1 workstation Support for: 1 bicycle Operating dimensions floor mounting: WxDxH in mm 300x300x2200 300x300x2200 Operating dimension for free-standing WxDxH in mm: 600x600x2200 Maximum lifting load: 85 kg* Continuous height adjustment in mm: 2000** Overall weight: 80 kg *the maximum useful lever load depends on the accessories used (gripper, etc.) **variable stroke available on request THE NEW SOLUTION IN THE BICYCLE WORKSHOP A 230 volt socket is all you require to lighten your load in the bicycle workshop. The electrically driven assembly stand makes work in the workshop easier, more ergonomic and, in its double version, also creates real space. It's great for creating a second workstation. Our contribution to better ergonomics in the workshop follows the trend that bicycles gain more and more importance, especially in urban environments. There is something going on on the cycle paths - and in the workshops as well. Cyclists who want to ride safely and smoothly for as long as possible should regularly hand their bike over an expert - whose workshop is preferably just around the corner, in the middle of the pedestrian zone. On the one hand, a good order situation will result in certain waiting periods, on the other hand it requires fast and ergonomic workflows. This is exactly where the bicycle lift comes in. The electrically driven mounting stand makes the work in the workshop easier and more ergonomic and, in addition, it makes space available when used in the double confi guration. The space saved can ideally be used for a second workstation. MORE CONVENIENCE FOR REPAIR AND SERVICE With our bicycle lift, we have developed a system that brings highly available, robust and precise industrial technology to the bicycle workshop. The solution makes work in service and repair noticeably more ergonomic and faster. With its set-up plates and optionally two mounting positions that can be lifted independently of each other, the BikeLift provides the necessary flexibility in your workshop. PICK UP BICYCLES DIRECTLY FROM THE GROUND AND LIFT THEM TO ANY DESIRED WORKING HEIGHT The BikeLift GDGT90 is an assembly stand that can be directly attached to a wall. Due to the fixed dowelling in the wall, the assembly stand is secure and stable. Furthermore, we offer a bike lift that is equipped with one or two drive units, which allows independent work, because space is always limited, especially in workshops close to the city center. This flexible unit can also be set up or fixed to the workshop floor with it's secure base stand. See the BikeLift GDGT90-S1 or GDGT90-S0 with the article numbers 290401 or 290402. MORE COMFORTABLE REPAIR AND SERVICE More comfort on the road, better ergonomics in the workshop. Everybody wants to ride a smoothrunning bike. With our new bike lift, we have developed a system that provides bike workshops with highly available, robust and accurate industrial technology. This solution makes service and repair work noticeably faster and easier. With the mounting plates and optionally two independently liftable assembly stations, the BikeLift ensures the necessary flexibility in your workshop. ALL FEATURES AT A GLANCE - for e-bikes, bicycles and cargo bikes - fl exible pick-up and holding systems - single and double workstations - low noise and little maintenance - space-saving due to compact design - highest reliability and operational safety - ergonomic and back-friendly - the drive is protected from water, grease and dust - modular mounting through the bottom plate, anchoring to the fl oor or wall - soft starts and stops thanks to frequency converter - hand or foot operatable switch - variable work height, lift height up to 2600 mm - safe freewheel system - installaton dimension, floor mounting WxDxH in mm: 300x300x2200 - installinstallation dimension for free-standing WxDxH in mm: 600x600x2200 - maximum lever load in kg: 85* - stepless height adjustment in mm: 2000** - total weight in kg: 80 *maximum useful lever load depends on accessories used (gripper, etc.) **variable stroke on request MOUNTING 1 Base plate Standard 00337 for GDGT 90 | 600 x 600 mm for fixed mounting and floor anchoring 2 Base plate Small 00338 for GDGT 90 | 300 x 300 mm for fixed mounting and floor anchoringTO EACH HIS OWN TOOL And so that everything also fits in the direction of the bicycle, the slide can be connected to different holding systems thanks to a wide variety of holes. Thanks to our adapter with Ų 50 mm, various gripping systems can be attached without difficulty. Thus, bicycle lift is easily adaptable, so that you can choose your preferred type of holding fixture. HOLDING FIXTURES 1. Expansion cone for seat tube. Article-no. 003310 Further information: as of Ų 27mm Load capacity: 35 Kg 2. Step mandrel-Set. Article-no. 003313 Further information: with 2 stepped pins Load capacity: 85 Kg 3. 3-point holder. Article-no. 003319 Further information: / Load capacity: 35 kg 4. Bike gripper. Article-no. 00331 Further information: Feedback Sports Load capacity: 35 Kg 5. Bike gripper. Article-no. 003312 Further information: VAR
Papildoma informacija apie prekę
Pavadinimas
Dviračio remonto stovas Cyclus Tools BikeLift S1 for 1 workplace without clamps (290401)
Kodas
STND53
Gamintojas
Cyclus Tools
EAN kodas
Atsiliepimai apie - Dviračio remonto stovas Cyclus Tools BikeLift S1 for 1 workplace without clamps (290401)
Parašykite savo atsiliepimą

Dviračio remonto stovas Cyclus Tools BikeLift S1 for 1 workplace without clamps (290401)

Parašykite savo atsiliepimą